The new self-steering axle

The new self-steering axle

19. September 2018

gigant has addressed the topic of steering arm bearings and has developed a completely new steering arm system.

The objective is clear – eliminate all lubrication points and absolute ease of service!

The problem with steering axles today is that maintenance is complex and repairs are difficult. With the new and patented steering arm system, the steering arm can be very easily separated from the axle body using the spherical joint heads that are positioned and screwed from the top and bottom, all without any special tools. The arm pins connect the steering arm with the axle body, but also serve as a retaining element for the spherical joint heads, which together with the integrated bearing clamps, make the system low-maintenance and extremely easy to service. Greased and adjusted one time by gigant, and the customer has no more work with the steering arm bearing.

To ensure that the self-steering axle is low-maintenance in all areas, gigant uses self-lubricating bearings and lifetime-lubricated slack adjusters for the camshaft bearings.

Moreover, a low-maintenance SKF compact bearing is also used here as well as the proven system with the drum in front of the hub.

But not only the low-maintenance components are worth mentioning, but also the more compact design that is achieved with the new steering arm bearing. It allows for the installation of the brake cylinder within the contour of the tyres.

The new self-steering axle on the exhibition stand by gigant – Trenkamp & Gehle:

  • Axle: GNKH3 12010 3020
  • Air Suspension: TLRM 50.40/12.1
  • Axle Load: 12,0 t
  • Drum Brake: 300 x 200
  • Ride Height: 210 - 270 mm
  • Tire: 17,5“ / 19,5“

 

Video here