DLS – Dual Lever suspension
Light, low-maintenance and robust – this is what the DLS axle system (Dual Lever Suspension) from gigant represents. The DLS enables heavy duty applications with maximum payload and minimum dead weight. The maximum axle load is 12 t – and that with a weight per axle line of only 675 kg, including hydraulic suspension cylinder.
The configurations can be adapted exactly to meet the requirements. A large spring travel of 300 mm and optimum roll stabilisation available on request ensure maximum safety in all situations.
Depending on the maximum steering angle of up to 57°, this results in longitudinal member widths of the vehicle frame of up to 650 mm. That leaves sufficient space between the axles for excavator recesses or innovative telescoping profiles. The load height with tyre size 235/75 R 17.5 or 245/70 R 17.5 is only 890 mm. And the weight per axle line is about 60 kg less than that of comparable systems on the market.
A low-maintenance bearing is a central concern for gigant. In the case of the DLS axle, the demand applies equally to suspension arm and hub unit (compact bearing). A further cost-saving detail: the piston rods of the suspension cylinders are protected against stone chipping and soiling by a cover.
DLS – Dual Lever suspension on the exhibition stand by gigant – Trenkamp & Gehle:
- Axle: DLS 12010 3020
- Axle Load: 12,0 t
- Drum Brake: 300 x 200
- Steering Angle: max. 57°
- Lift in total: 300 mm
